| FunCount Frequency Counter |
| Written by nuxie1 | |||||||
| Sunday, 21 September 2008 | |||||||
Page 1 of 4
This simple design uses the 20 pin ATTiny2313 microcontroller to measure frequencies from 1Hz to over 2MHz. The frequency is displayed on a standard HD44780 16x2 LCD. A bright white text, blue backlit LCD is included with the kit. The device requires a regulated 5V power supply. The PCB also provides access to the unused microcontroller pins, so that the board can also be used as a general purpose AVR development board with an LCD. The input voltage needs to have at least a 3V swing to be able to trigger the counter. A complete kit can be purchased from www.nuxieshop.com, along with pre-programmed AVRs and blank PCBs. |
|||||||
| Last Updated ( Wednesday, 06 May 2009 ) | |||||||
| Next > |
|---|