|
FunCount Frequency Counter |
|
Written by nuxie1
|
|
Sunday, 21 September 2008 |
|
Page 2 of 4
The design is very straightforward, using only a few components.
The microcontrollers supplied in the FunCount kit come pre-programmed with the FunCount code. If you wish to use your own ATTiny2313, you can program it with the HEX file, or modify the BASCOM-AVR file.
| Part |
Quantity |
| FunCount PCB |
1 |
| Programmed ATTiny2313 |
1 |
| 20MHz Crystal |
1 |
| 22pF Capacitor |
2 |
| 100uF Capacitor |
1 |
| 3pin Screw Terminal |
1 |
| 16pin Female Header |
1 |
| 16pin Male Header |
1 |
| 16x2 LCD |
1 |
| 10k Vertical Pot |
1 |
| 10k Resistor |
2 |
| 390 Resistor |
2 |
| 0.1uF Capacitor |
1 |
| Green LED |
1 |
|
|
Last Updated ( Wednesday, 06 May 2009 )
|
